![]() |
Routines |
| Prev: A43E | Up: Map | Next: A524 |
|
Used by the routines at draw_aligned_row and draw_row_shifted.
An object that has been destroyed dissolves over seven passes (prepare_draw): its new image, just drawn into the buffer, is ANDed with that step's mask from dissolve_mask_bits, rotated a bit to the right at every byte so the gaps do not line up in columns. The masks keep seven bits, then six, down to one, so the object crumbles away.
|
||||
| dissolve_sprite | A498 | LD A,(dissolve_step) | Not dissolving: go and copy the box back | |
| A49B | AND A | |||
| A49C | JP Z,dissolve_sprite_2 | |||
| A49F | AND $0F | D is the mask for this step | ||
| A4A1 | LD HL,sprite_left_clip | |||
| A4A4 | CALL add_a_to_hl | |||
| A4A7 | LD D,(HL) | |||
| A4A8 | LD HL,(saved_speed) | The new image's start in the buffer | ||
| A4AB | LD A,(new_sprite_width) | The bytes a row covers (one more if the image is not on a byte boundary), and the rows | ||
| A4AE | LD E,A | |||
| A4AF | LD A,(new_sprite_rows) | |||
| A4B2 | LD C,A | |||
| A4B3 | LD A,(new_sprite_x) | |||
| A4B6 | AND $07 | |||
| A4B8 | JR Z,dissolve_sprite_0 | |||
| A4BA | INC E | |||
| dissolve_sprite_0 | A4BB | LD B,E | ||
| dissolve_sprite_1 | A4BC | LD A,D | AND each byte with the mask, turning the mask a bit each byte | |
| A4BD | AND (HL) | |||
| A4BE | LD (HL),A | |||
| A4BF | RRC D | |||
| A4C1 | INC L | |||
| A4C2 | DJNZ dissolve_sprite_1 | |||
| A4C4 | LD A,$00 | On to the next row (the LD's operand is patched by erase_old_draw_new) | ||
| A4C6 | ADD A,L | |||
| A4C7 | LD L,A | |||
| A4C8 | DEC C | |||
| A4C9 | JR NZ,dissolve_sprite_0 | |||
|
This entry point is used by the routine at erase_old_draw_new.
|
||||
| dissolve_sprite_2 | A4CB | LD DE,(piece_page_x) | The copy back: the screen address of the box, and the buffer | |
| A4CF | LD HL,$F800 | |||
| A4D2 | LD A,(sprite_left_clip) | Straddling the left edge: copy just the part right of it, as draw_sprite_pair worked out | ||
| A4D5 | AND A | |||
| A4D6 | JR Z,dissolve_sprite_3 | |||
| A4D8 | LD A,($A531) | |||
| A4DB | LD L,A | |||
| A4DC | JP dissolve_sprite_7 | |||
| dissolve_sprite_3 | A4DF | LD A,(piece_dx) | B is the box's width in pixels | |
| A4E2 | ADD A,A | |||
| A4E3 | ADD A,A | |||
| A4E4 | ADD A,A | |||
| A4E5 | LD B,A | |||
| A4E6 | LD A,(piece_x) | Does the box start at column 0? | ||
| A4E9 | AND A | |||
| A4EA | JR Z,dissolve_sprite_4 | |||
| A4EC | LD C,A | Does it reach past x=$E8, the right edge of the play area? If not, copy all of it (copy_box_out) | ||
| A4ED | ADD A,$17 | |||
| A4EF | ADD A,B | |||
| A4F0 | JP NC,copy_box_out | |||
| A4F3 | JR dissolve_sprite_5 | |||
| dissolve_sprite_4 | A4F5 | INC E | From column 0: leave the frame column out, and copy the rest | |
| A4F6 | INC L | |||
| A4F7 | LD A,(piece_dx) | |||
| A4FA | DEC A | |||
| A4FB | JR dissolve_sprite_6 | |||
| dissolve_sprite_5 | A4FD | LD A,$EE | Past the right edge: copy only the bytes left of x=$E8 | |
| A4FF | SUB C | |||
| A500 | SRL A | |||
| A502 | SRL A | |||
| A504 | SRL A | |||
| dissolve_sprite_6 | A506 | LD B,A | Patch the step and the DJNZ for that many bytes | |
| A507 | LD A,(piece_dx) | |||
| A50A | SUB B | |||
| A50B | LD ($A531),A | |||
| A50E | LD A,B | |||
| A50F | XOR $07 | |||
| A511 | DEC A | |||
| A512 | ADD A,A | |||
| A513 | ADD A,$03 | |||
| A515 | LD ($A520),A | |||
| dissolve_sprite_7 | A518 | LD C,$FF | C $FF; B the rows plus one | |
| A51A | LD A,(piece_rise) | |||
| A51D | LD B,A | |||
|
This entry point is used by the routine at copy_out_part_row.
|
||||
| dissolve_sprite_8 | A51E | PUSH DE | Keep the row's screen address; copy a row (copy_out_part_row) or finish | |
| A51F | DJNZ dissolve_sprite_8 | |||
| A521 | JP copy_out_done | |||
| Prev: A43E | Up: Map | Next: A524 |