Prev: AA27 Up: Map Next: AAD7
AA37: Hang a rocket part under the ship, or take it off
Used by the routines at draw_ship_image and start_landscape.
The ship's picture is built in RAM at ship_picture, six bytes a row, bottom row first, and a rocket part the ship carries hangs in its bottom rows. This XORs the part's graphic (from type $1E's frame list rocket_part_frames, by the part number in bits 0-3 of the ship record's +$1F) into the picture, shifted four pixels right through the shift tables' fourth and fifth pages (shift_tables) and one byte in -- so the same call puts it in and takes it out -- and clears the same place on the screen (four bytes from a byte in, the part's height up from the ship's bottom line), presumably because the direct drawer rubs the ship out with its picture as it now is, which would leave the old part's pixels behind. Called from draw_ship when bit 7 of +$1F asks for it.
Then (also the entry at the 24th instruction, used by build_ship_sprite when it rebuilds the picture) the ship's height and the picture's start are set for whether a part hangs there (bit 6 of +$1F): five rows more and the picture from ship_picture, or five fewer and from 30 bytes into it; the ship's line for shots (ship_line) moves by three, and the ship record's screen y and position are moved to match (move_object, ship_speed_from_scroll).
Input
IX The ship's record (ship_record)
toggle_carried_part AA37 LD HL,rocket_part_frames The part's graphic
AA3A LD A,(part_being_fitted)
AA3D AND $0F
AA3F LD C,A
AA40 CALL table_word
AA43 EX DE,HL
AA44 LD A,(DE) Its width and height; the picture's first row, a byte in
AA45 LD B,A
AA46 LD (row_count_spare),A
AA49 INC DE
AA4A LD A,(DE)
AA4B LD (pieces_left),A
AA4E LD C,A
AA4F LD HL,$F6BA
toggle_carried_part_0 AA52 PUSH HL Each byte, shifted four pixels right, XORed into two bytes of the picture
toggle_carried_part_1 AA53 PUSH BC
AA54 LD B,$FC
AA56 INC DE
AA57 LD A,(DE)
AA58 LD C,A
AA59 LD A,(BC)
AA5A XOR (HL)
AA5B LD (HL),A
AA5C INC B
AA5D INC HL
AA5E LD A,(BC)
AA5F XOR (HL)
AA60 LD (HL),A
AA61 POP BC
AA62 DJNZ toggle_carried_part_1
AA64 POP HL Next row, six bytes on
AA65 LD A,(row_count_spare)
AA68 LD B,A
AA69 LD A,$06
AA6B CALL add_a_to_hl
AA6E DEC C
AA6F JR NZ,toggle_carried_part_0
AA71 LD HL,(ship_screen_x) Clear the part's rows under the ship on the screen, four bytes a row
AA74 CALL pixel_to_screen
AA77 LD A,(pieces_left)
AA7A LD B,A
AA7B INC L
toggle_carried_part_2 AA7C LD (HL),$00
AA7E INC L
AA7F LD (HL),$00
AA81 INC L
AA82 LD (HL),$00
AA84 INC L
AA85 LD (HL),$00
AA87 DEC L
AA88 DEC L
AA89 DEC L
AA8A CALL line_up_hl
AA8D DJNZ toggle_carried_part_2
AA8F LD A,(map_rebuild) Not while the view is being built (map_rebuild)
AA92 AND A
AA93 RET NZ
This entry point is used by the routine at build_ship_sprite.
toggle_carried_part_3 AA94 LD A,(part_being_fitted) A part hangs there: the picture from its first byte and five rows more
AA97 LD B,A
AA98 LD A,(ship_height)
AA9B LD C,A
AA9C LD (IX+$09),$08
AAA0 LD E,$03
AAA2 LD HL,ship_picture
AAA5 LD A,$05
AAA7 BIT 6,B None: from 30 bytes on and five rows fewer
AAA9 JR NZ,toggle_carried_part_4
AAAB LD HL,$F6D7
AAAE LD E,$FD
AAB0 NEG
AAB2 LD (IX+$09),$F8
toggle_carried_part_4 AAB6 LD (ship_graphic),HL The ship's picture and height (in star_offsets)
AAB9 ADD A,C
AABA LD (ship_height),A
AABD LD A,(ship_line) Adjust the ship's shot line and record to match, and recompute its position
AAC0 ADD A,E
AAC1 LD (ship_line),A
AAC4 LD A,(IX+$09)
AAC7 ADD A,(IX+$1E)
AACA LD (IX+$1E),A
AACD LD (IX+$07),$00
AAD1 CALL move_object
AAD4 JP ship_speed_from_scroll
Prev: AA27 Up: Map Next: AAD7