Prev: E41B Up: Map Next: E48B
E41C: Fill the ground under a terrain piece, column by column
Used by the routines at after_step_drawn and fill_flat_end_column.
Called by after_step_drawn once a piece is drawn, to fill what lies beneath it with the ground's checkerboard (DE = $55AA) or to clear it (DE = 0), and by fill_flat_end_column to clear a column four rows deep. Each column is one byte wide and climbs from HL for C pairs of rows: D is written on one pixel row and E on the row above. After each column L moves on by the piece's width in bytes (piece_dcolumn), and piece_page_y, the screen row the fill has reached, goes up by the column's height. B, the number of columns, is the number of steps of the piece drawn (piece_steps_done), so this is one column a step, each the step's width in bytes across and as tall as the fill needs, which is how the ground under a slope comes out solid.
A column is clipped to the play area: one in screen column 0 or 29 to 31 is not drawn at all (the pointer is only moved on); if the fill starts below row 183 ($B7, the bottom of the play area) the first rows are dropped and it starts at the bottom row of the play area; and near the top it is cut short by what the sum with piece_rows (the piece's height) and 24 says. The arithmetic of the top clip is read but not traced through.
Input
B the number of columns
C' pairs of rows in each column
DE' the two pattern bytes ($55AA for the ground's checkerboard, 0 to clear)
HL' the screen address of the first column's bottom byte
fill_under_slope E41C EXX Into the other set: B counts this column's pairs of rows
E41D LD B,C
E41E LD A,L Off the play area (column 0, or 29 and up)? Only move on
E41F AND $1F
E421 DEC A
E422 CP $1C
E424 JR NC,fill_under_slope_3
E426 LD A,(piece_page_y) Does the fill start below the play area (row 184 or more)?
E429 CP $B8
E42B JR C,fill_under_slope_0
E42D JR Z,fill_under_slope_0
E42F SUB $B7 Then drop the rows that would lie below it
E431 SRL A
E433 NEG
E435 ADD A,B
E436 LD B,A
E437 LD H,$57 And start on the play area's bottom row, $57C0 + the column
E439 LD A,L
E43A AND $1F
E43C OR $C0
E43E LD L,A
E43F JP fill_under_slope_1
fill_under_slope_0 E442 LD B,A Will the column reach above the top of the play area?
E443 LD A,(piece_rows)
E446 NEG
E448 ADD A,B
E449 SUB $18
E44B LD B,C
E44C JR NC,fill_under_slope_1
E44E CPL Then shorten it
E44F SRL A
E451 NEG
E453 ADD A,B
E454 LD B,A
fill_under_slope_1 E455 LD A,(piece_page_y) piece_page_y goes up by the column's height (two rows a pair)
E458 SLA C
E45A SUB C
E45B SRL C
E45D LD (piece_page_y),A
fill_under_slope_2 E460 LD (HL),D Fill the column: D, up a row, E, up a row
E461 DEC H
E462 LD (HL),E
E463 CALL line_up_hl
E466 DJNZ fill_under_slope_2
E468 LD A,(piece_dcolumn) On to the next column, by the piece's width in bytes
E46B ADD A,L
E46C LD L,A
E46D EXX The next column
E46E DJNZ fill_under_slope
E470 RET
fill_under_slope_3 E471 LD A,(piece_page_y) A column off the play area: account for its height and step across
E474 SLA B
E476 SUB B
E477 SRL B
E479 LD (piece_page_y),A
E47C LD A,(piece_dcolumn)
E47F ADD A,L
E480 LD L,A
fill_under_slope_4 E481 DEC H Move HL up by its height without drawing
E482 CALL line_up_hl
E485 DJNZ fill_under_slope_4
E487 EXX The next column
E488 DJNZ fill_under_slope
E48A RET
Prev: E41B Up: Map Next: E48B